High Quality FRP/GRP Fiberglass Pipe Fittings, FRP Tee/Elbow, Fiberglass Flange

We will keep on the manufacturing of XR membrane desilication, Chemical Tank, high strength structural GRP layer, hoping to drive the overall progress of the industry with new models and technologies, and become the leader of excellence. We promise that we will persevere in providing consistent and high quality technical services to our customers. To provide customers with high quality service is the direction of our work and the yardstick of value evaluation. We regard the rapid and healthy development of the company as a responsibility and a mission, which is the first priority of all our work. We rely on product quality, technological innovation and quality service to create an advantage in the market.

Product price：$139-$26999 per pcs

Notes: The prices are subject to product specifications and raw material prices. Our products can be customized. Please leave your contact information, I will serve you wholeheartedly.

Product specification：

Product features：

Light weight
(1/4 weight of ductile iron; 1/10 weight of concrete)
•Low transport costs (nestable)
•Eliminates need for expensive pipe handling equipment

Product advantages：

Precision sealability

With elastomeric rubber rings

•Tight, efficient joints designed for bell and spigot to eliminate infiltration and ex-filtration

•Ease of joining, reducing installation time

• Accommodates small changes in line direction without fittings or differential settlement.

Product application：

Drinking water transportation:FRP reduce tee has good wear resistance.The water containing a large amount of mud and sand was loaded into the pipe to carry out a comparative test on the influence of rotation wear. After 3 million times of rotation, the wear depth of the inner wall of the pipe is as follows: the steel pipe with tar and enamel coating is 0.53mm, and the steel pipe with epoxy resin and tar coating is 0.52mm;After the surface hardening treatment of steel pipe is 0.48mm, FRP pipe is 0.21mm.This shows that it is quite wear-resistant.So it's very good for carrying water.

FRP Tee Reducer has good process performance. Generally, it is used when making FRP Spool, the FRP Spool contains two or more FRP pipe fittings. It is especially applicable when installation space is limited and pipe design requirements are detailed. The FRP Spool produced by our company can be customized according to customer requirements.

Quality control test:

Hydrostatic Design Basis - HDB:one of important qualification test is the establishment of the Hydrostatic Design Basis - HDB. This test is carried out in accordance with ASTM D2992 Procedure B and requires hydrostatic pressure testing to failure (leakage) of many pipe samples at a variety of very high constant pressure levels. As in the previously described strain corrosion test, the resulting data is evaluated on a log-log basis for pressure (or hoop tensile strain) vs. time to failure and then extrapolated to 50 years. The extrapolated failure pressure (strain) at 50 years, referred to as the hydrostatic design basis (strain) or HDB, must be at least 1.8 times the rated pressure class (strain at the rated pressure).

Our highest value orientation is to create a high-quality staff full of care for human and nature, and to create the best quality High Quality FRP/GRP Fiberglass Pipe Fittings, FRP Tee/Elbow, Fiberglass Flange. While attaching importance to technology development, the company also pays attention to scientific, systematic and modern quality management. We focus on technological innovation, continue to increase investment in research and development, strengthen platform construction, and attach great importance to the construction of technology research and development centers.