Product price：$169.9-$36899 per pcs

Notes:The prices are subject to product specifications and raw material prices and exchange rate fluctuations.Please leave your contact information, I will serve you wholeheartedly.

Product specification：

Diameter	DN25-DN4000
Connection method	Flange joint
Manufacturing standards	ASTM,ASME, BS, etc.
Design pressure	Gravity-2.5Mpa

Product features：

Light weight

(1/4 weight of ductile iron; 1/10 weight of concrete)

•Low transport costs (nestable)

•Eliminates need for expensive pipe handling equipment

Product advantages：

Triple Flanged FRP TEE uses a special looper FRP flange. The mold is basically the same as the integral flange, only omit the guide post part. After assembling, it is a cylinder with a conical hole. The inner diameter of the big end of the conical hole is equal to the big end of the outer neck of the cone neck, and the inner diameter of the small end of the conical hole is equal to the outer diameter of the cylinder, that is, the conical hole is determined according to the size of the cone neck.The use of the die can make the flange cylinder, cone neck, sealing line, bolt hole, flange ring a whole molding, high geometric accuracy, smooth surface, strong interchangeability, can eliminate the mechanical processing procedure, improve production efficiency.

Product application：

Sea water desalination project:Triple Flanged FRP TEE is widely used in desalination GRP pipeline connections due to its convenient installation and excellent hydraulic properties

Packing and Transportation:

For some larger GRP pipe fittings, pallet packaging is generally adopted. For some fragile FRP pipe fittings, generally use wooden case packing;For export project, according to customer requirements for packaging, no requirements according to the above method for packaging.For raw materials, the general use of wooden packing or container delivery.

Product certification：

Our products meet the requirements of BS EN, as shown in the certificate below：